Ppp Paths - Bay Networks Nautica 200 Reference Manual

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:

PPP Paths

box# new pa ppp/pathname
box# mod pa ppp/wat1
path/ppp/wat1#
box# del pa ppp/wat1
4-12
BOOTP-Relay
bootp
no
no, yes
Allows BOOTP Relay requests to be sent along this path
if the BOOTP Relay Agent parameter in the System
settings (page 5-12) is enabled.
For more information on BOOTP-Relay, refer to
Chapter 1.
Point to Point Protocol (PPP) paths are created using the
following syntax:
Where is the NEW verb (page 17-21),
new
PAth context,
PPP
used between the path type and its name, and
user defined name for the path.
To MODify an existing PPP path, use the same syntax as above,
but replace the
new
the MODify verb (page 17-20). For example:
To remove a PPP path from the router, use the same syntax as
above, but replace the verb with the
the DELete verb (page 17-12). For example:
Once you have edited or created a path, BCC moves you into the
path object. Typing
is the path type (Table
verb with the
mod
del
at this point lists all the path attributes.
Info
takes you into the
pa
4-1), is the separator
/
pathname
verb. is the MTC for
mod
verb. is the MTC for
del
117237-C Rev. A
is the