Bay Networks Nautica 200 Reference Manual page 201

Parameter:
Default:
Options:
Function:
Parameter:
Default:
Options:
Function:
117237-C Rev. A
OutgoingRes
0
0, 1, 2
The Nautica 200 has two channels that can be reserved
for outgoing data calls. Specifying 1 or 2 here will
reserve the channels. If the option is left at 0, then all the
channels are used for outgoing data calls as required.
Note: Reserving both channels for outgoing data calls will
mean that the unit can no longer send voice calls.
Caution: The number of incoming and outgoing channels must
not exceed the total channel capacity of the unit (2 for a
Nautica 200).
Switch Type
Nat.ISDN
Nat.ISDN, AT&T Custom(Multipoint),
AT&TCustomptp(Point-Point), Nortel DMS
You need only specify a switch type if you are using a
Nautica router with a U ISDN interface (North
America).
If you are using a U ISDN interface, select the switch
type used by your local telephone company's central
office.
Controlling Router Devices
7-19