Bay Networks Nautica 200 Reference Manual page 170

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
5-10
Blacklist-Timeout
bl
0
A valid time in seconds from 0 to 4294967
Paths are blacklisted if attempts to reach them fail.
Setting a time here specifies how long paths will remain
blacklisted.
When a path is blacklisted, all its associated routes are
marked as unreachable. These routes will eventually
decay (be lost) unless they are updated. This allows
ISDN-connected networks to use alternate routes if they
are setup. A path cannot be used while it is on the
blacklist.
Leaving this parameter at the default of 0 specifies
exponential blacklisting. Each time a path is re-tried and
fails, the blacklist time is doubled.
Secure-Unit
se
No
No, Yes
Enabling this option adds an extra dimension to the
security of the unit.
Incoming calls will only be accepted into the unit if they
match a path that already exists in the unit. Calls that do
not match any paths will be dropped.
117237-C Rev. A