The Wins Configured Object - Bay Networks Nautica 200 Reference Manual

NauticaRS Release 4.1 Reference Guide

The WINS Configured Object

box# lso -l
path/eth/LAN01
path/ppp/wat1
device/box/MARLIN
device/eth/LAN01
device/wan/WAN01
device/bri/ISDN-TA01
device/isdn/ISDN01
device/isdn/ISDN02
device/pri/ISDN-PRI01
wins/remote_site01/specific/static
wins/remote_site02/group/dynamic
box#
16-2
Like PAths and DEVices, the WIns context cannot be entered
directly. Instead you have to create or modify a WINS object, and
this moves you to the WINS configured object prompt.
To view any WIns setup on your system, type
configuration prompt:
Note: This list has been deliberately shortened
To edit or create a WIns, use the following syntax:
verb wi name/group/dynamic
Where is the action required here (NEW, MOD, DEL),
Verb
moves you into the WIns Context and
as follows:
at any
lso -l
Name/Group/Dynamic
117237-C Rev. A
WI
is