Bay Networks Nautica 200 Reference Manual page 136

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
4-24
• ForwardMismatches: If a packet comes through
that does not match the Profile of the Filter specified
in the previous attribute, then the call will be
allowed through.
BOOTP-Relay
bootp
No
No, Yes
Enables BOOTP-Relay on this path
If this path is to be used to send BOOTP-Relay
information, enable this option. BOOTP-Relay must
also be turned on for the router as a whole in the
context.
system#
For more information on BOOTP-Relay, refer to
Chapter 1.
CNum 1/ to 4/
cn #/ (where # can be 1,2,3 or 4)
(Blank)
A maximum of four valid telephone numbers
Callback numbers to be supplied to a user requesting
additional bandwidth via Bandwidth Allocation Control
Protocol (BACP)
When you place a call to a remote unit and download
information, there are times when you will need extra
bandwidth to receive the volume of data requested. In
these instances, the remote unit will supply you with a
call-back number which your unit will dial to receive
extra bandwidth.
117237-C Rev. A