Bay Networks Nautica 200 Reference Manual page 228

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
7-46
Ident
id
Cannot be changed by the user
The name depends on the physical device. It is set by the
system and cannot be changed by the user.
State
st
enabled
enabled, disabled
The default here is Enabled, set to Disabled and the
Wan is no longer enabled.
Mode
mode
framerelaysync
framerelaysync
The operating mode of the device: FrameRelaySync.
Use Sync for establishing connections to other Nautica
or PPP routers via a leased circuit connection. If
attaching to a frame relay network, either directly or via
a leased circuit, FrameRelaySync must be selected.
117237-C Rev. A