Bay Networks Nautica 200 Reference Manual page 168

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Instructions:
5-8
IPX-Routing
ipx-r
no
no, yes
To allow IPX information to be routed by the unit.
Enabling this option enables IPX for the unit.
IPX-Filtering
ipx-f
NoFiltering
NoFiltering, ForwardOnMatch, RejectOnMatch
This attribute has three values:
• NoFiltering This is the default value and if selected
will turn filtering off. If you do need to filter IPX
traffic, then use one of the other two options.
• Reject on Filter Match will only allow frame types
that do not match a predefined filter into the Nautica
router. Any frames that match the filter will be
dropped (not forwarded by the unit).
• Forward on Filter Match will only allow frame
types that match a predefined filter into the unit. All
other frames will be dropped.
For more information on creating IPX filters, refer to Chapter 9.
117237-C Rev. A