Path Statistics - Bay Networks Nautica 200 Reference Manual

Path Statistics

bcc> sh pa st
Path Port
LAN01 LAN01
m4000 ISDN01
bcc>
Parameter:
Function:
Parameter:
Function:
117237-C Rev. A
For information on editing existing paths or creating new ones,
refer to page 4-5 onwards. For information on Devices, refer to
Chapter 7. For information on WINS, refer to Chapter 16.
Statistics can only be displayed for a path that is currently active
(receiving or sending a call). To display a list of paths that are
active, use the following syntax from any configuration prompt:
sh pa st
A list of all path statistics will appear:
TeleNo Tx(%)
0.0
I 3840203.0
To display the statisitics for just one port, use the following
syntax:
sh pa st [port name]
Where
port name
so on.
The data here is grouped into several parameters. Each parameter
is displayed in a column. These are as follows:
Path
Path name as configured
Port
Unit port(s) currently used by the path
Rx(%) TxLZ
0.0
2.9 1.8
is the name of the port, LAN01, ISDN01 and
Working with Paths
RxLZ BW
10000000 10000000
1.7 64000
Total
64000
4-3