Bay Networks Nautica 200 Reference Manual page 94

NauticaRS Release 4.1 Reference Guide
Do you want to use PPP? (y/n):
Enter the remote ISDN number to dial.
Enter the password/secret/key (if any):
Quick Setup complete. The Router is now ready for use
[Save] bcc>
3-16
Internet Protocol Extended (IPX) is a protocol used by Novell to
route information across their networks. If you are using a Novell
network you should answer Yes to this question, otherwise leave
it at the default of No.
Click here if you want to setup the router for
Answering No to the IPX question brings up the next setup
question:
Point to Point Protocol (like all of the options in the Quick Setup,
can be set later. The default here is No, we recommend you
answer Yes if you want to set your router as a standard router.
Type in here the full number of the remote unit you want to call.
This is the ISP number, or the number of the remote unit to which
you want to connect. When setup completes, it places a call to this
number to learn RIPs, make sure the ISDN line is connected to
the unit.
If you are connecting to the Internet via an ISP, they will give you
a password. Enter this password here.
Alternatively you may need extra security on your router.
Entering a password here will set up the passwords/secrets for
incoming and outgoing PAP and CHAP. If you require more
information on Password Authentication Protocol (PAP) and
Challenge Handshake Authentication Protocol (CHAP), turn to
Chapter 12.
This is the last question in the setup; the prompt will now read:
A call is made to the specified ISDN number at this point to
establish routes. After a minute you can cancel this call using the
verb:
CANcel
IPX Routing.
117237-C Rev. A