Bay Networks Nautica 200 Reference Manual page 261

Parameter:
MTC:
Function:
Parameter:
MTC:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
B-MLength
b-m
Subnet mask of B-IPAddr
B-Port
b-p
A valid port number
If the Protocol selected is TCP, !TCP, UDP or !UDP
(!=NOT), then a port type may be entered here against
which a further level of matching will be made. For
example, entering 23 here will match for TELNET.
Any port number may be entered here. For details of the
well-known port numbers, refer to
Protocol
pr
none
none, icmp, !icmp, tcp, !tcp, udp, !udp, ospf, !ospf
This option allows the user to narrow down the filtering
beyond just the IP addresses. None is the default option
allowed, but there are several other entries that can be
used.
The values for this field are as follows:
• ICMP (Internet Control Message Protocol) With
this option set, information passed between these IP
addresses will only be matched if this protocol is
used. As an example,
IP and OSPF on a Nautica Router
Table
uses ICMP.
PING
8-4.
8-17