Bay Networks Nautica 200 Reference Manual page 173

Parameter:
MTC:
Default:
Options:
Instructions:
Parameter:
MTC:
Default:
Function:
Parameter:
MTC:
Default:
Function:
117237-C Rev. A
BootP-Relay-Server
bootp-relay-s
255.255.255.255
The IP Address of the BOOTP Relay server to which
BOOTP requests will be sent
The default here is 255.255.255.255. Leaving this option
at the default means that BOOTP requests will be
forwarded to those paths that have been set up for
BOOTP Relay, rather than to a specific server (See
page 4-12).
If an IP address is entered here, BCC will route BOOTP
Relay requests to this address and not along a
pre-defined path.
BOOTP Relay is explained in more detail on page 1-21.
SysDescr
sysd
Not Applicable
An SNMP description of the unit being used; this option
cannot be changed by the user.
SysObjectID
syso
Not Applicable
Information about the SNMP system object. This also
cannot be changed by the user.
Modifying System Settings
5-13