Bay Networks Nautica 200 Reference Manual page 109

Type: <space> to page; <return> advance 1 line; Q to quit
[Save] system#
117237-C Rev. A
Where there are more attributes or configured objects than can be
displayed on one screen, a prompt similar to this will appear at
the bottom of the screen:
Pressing [
SPACE
will list the next page one line at a time and [
to the current prompt ready for the next command.
It will also be necessary to
will prompt for this by placing the [
command line. For example, after changing the name of the unit,
the command line will look as follows:
To save changes, type
The following chapters deal with all the attributes that can be
changed in the various menu contexts of configuration mode. A
Verb Reference chapter is also included at the end of the manual
detailing all the verbs used in BCC and how they operate.
At the beginning of each section is a table listing the attributes,
their options and MTCs where applicable. The options are then
explained in more detail.
Understanding the Command Line
] will list the next page of attributes, [
any changes made, and BCC
SAVE
[
SAVE ENTER
] will return BCC
Q
] prompt in the
SAVE
] at the prompt.
]
ENTER
3-31