Bay Networks Nautica 200 Reference Manual page 212

NauticaRS Release 4.1 Reference Guide
Parameter:
Default:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
7-30
PPP-Profile
pp
Either
Either, PAP, CHAP, BWPAP, BWCHAP, BWEither,
None, custom profile
Specifies the default PPP profile that will be used on this
ISDN port for incoming calls. The PPP profile allows
for extra security on the unit.
There are several values that you can set:
• Either: Either incoming PAP or CHAP are accepted
on this port.
• PAP: Only incoming PAP is accepted.
• CHAP: Only incoming CHAP is accepted.
• BWPAP: Incoming and outgoing PAP is accepted.
• BWCHAP: Incoming and outgoing CHAP is
accepted.
• BWEither: Both incoming and outgoing PAP and
CHAP are accepted.
• None: No profiles are used.
• Custom Profile: A profile you have designed
yourself will be used. To design your own PPP
profiles, refer to Chapter 12.
e1-FrameType
e1
crc4
crc4, noncrc4
The default here is crc4, the only other option allowed is
noncrc4. With this option set to CRC4 frame checking is
turned on. Make sure that the PRI provider supports this
option.
117237-C Rev. A