NauticaRS 5.5R Reference Guide
Modifying and Creating Filters
9-14
To edit or create a filter, use the following syntax:
[co] [ip] [new|mod] filt name
where co moves the router into config mode (if required), ip
moves the BCC into the ip object (if necessary), new|mod are the
new or modify verbs (optional), filt is the MTD for the filter
object and name is the name assigned to this filter.
After you have created or modified the filter, the BCC moves into
the filter object:
filter/central#
Typing i at this prompt lists all the parameters for the filter. In the
table below, click on the parameter for which you require further
assistance.
name
a-mlength
b-ipaddr
b-port
flag
a-ipaddr
a-port
b-mlength
protocol
117237-E Rev.00