Bay Networks Nautica 200 Reference Manual page 229

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
Default:
Default:
Options:
Function:
117237-C Rev. A
Speed
sp
64000
A valid speed
The speed, in bits/second, of the interface.
Changing this parameter does not change the actual
device speed, which is determined by the attached DCE
clock rate. This parameter should be altered to allow the
correct device speed to be displayed in all the relevant
status screens.
Note: to operate with the new settings, the device must be
powered off and on after changing the WAN device speed.
PathType
pt
nau
nau, ppp, eth, frr
Select the Path type from the Following: Nau (Nautica),
PPP (Point to Point), Frr (Frame Relay).
PPP-Profile
ppp-p
Either
Either, PAP, CHAP, BWPAP, BWCHAP, BWEither,
None, custom profile
Specifies the default PPP profile that will be used on this
ISDN port for incoming calls. The PPP profile allows
for extra security on the unit.
Controlling Router Devices
7-47