Bay Networks Nautica 200 Reference Manual page 135

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Bridging
bridgi
no
no, yes
Allow or disallow bridging on the router
Only change this parameter to yes if bridging is to be
supported on this router. For more information on
Bridging, refer to page 1-24.
Filt-Profile
filt-p
0
A User defined number
The profile number of the filter used on this path.
Filters can allow or disallow information into the router.
If filters have been created (page 8-11) assign the profile
number of the filter to be used on this path.
Filt-Action
filt-a
dropmismatches
dropmismatches, forward mismatches
Specifies how data is compared against a filter specified
in the Filt-Profile parameter.
There are two values that can be set for this parameter:
• DropMismatches: This is the default option. If a
Filter Profile number has been entered in the
previous attribute, DropMismatches will drop any
incoming packets that do not match the options
defined for that Filter.
Working with Paths
4-23