Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Offset
of
0
A valid offset in bytes
Specifies how far into the packet the matching needs to
start.
The length parameter is how much of the packet needs to
be checked, offset specifies where in the packet to start
checking this length. It is entered in bytes.
Enter a valid offset in bytes.
Type
ty
data-in
data-in, data-out, bothway, call
Specifies the type of Frame Filter this is to be.
Set this value to one of the following:
•
Data-In
The Filter is only applied to incoming
:
packets.
•
Data-Out: The Filter is only applied to outgoing
packets.
•
Bothway
:
The Filter works on both in and outgoing
filters.
•
Call: If a match is made with the packet, an ISDN
call is raised.
Bridge Filters
11-5