Pri Attributes; Pri Mode - Bay Networks Nautica 200 Reference Manual

NauticaRS Release 4.1 Reference Guide

PRI Attributes

device/pri/ISDN-PRI01#
7-22
This option is not available on the Nautica CLAM or Nautica
200.
Using a Primary Rate Interface (PRI) gives you up to 30 channels
into the Nautica router you are using. These channels are mapped
to ISDN ports.
It is possible to use your PRI card to create WAN ports instead of
ISDN ports. Using your PRI in fractional mode allows you to
specify which channels you want attached to which WAN port,
thus increasing the amount of information that can be passed
through an individual WAN port.
Select the operational mode for your PRI card:

PRI Mode

PRI Mode
To edit a PRI device, use the following syntax:
mod dev pri/isdn-01
where is the MTC for the MODify verb,
mod
DEVice, pri is the device type and
PRI device being edited.
The BCC prompt changes to show that you are editing the PRI
device:
Typing Info at this prompt lists all the attributes for the device.
These attributes are shown in
Fractional Mode
dev
isdn-01 is the number of the
Table 7-4.
117237-C Rev. A
is the context