Bay Networks Nautica 200 Reference Manual page 430

NauticaRS Release 4.1 Reference Guide
Example:
box# sh config
box# sh -s config
box# sh ip ro
box# sh -s ip ro
box# sh -g isd dev st
Type Identification Location
ISDN01 Internal-1
ISDN02 Internal-2
box#
17-26
The CONFIG modifier will list the entire unit
configuration on the screen.
The CLASS modifier displays statistics for a specific
class.
To display the unit configuration, the following is typed:
The configuration scrolls to the bottom of the screen and
then you are prompted to continue. To display the
configuration without these prompts, type the following:
where the modifier turns on scrolling.
-s
To display the statistics for a class, for example, IP
routes, the following is typed:
The modifier can also be used here.
-s
To display just ISDN devices, the following is typed:
Enabled
Enabled
In this example, the
those devices containing the text "isd". The
can be used to match everything but the text string:
Enabled Status
Idle Idle
Idle Idle
modifier shows statistics for only
-g
modifier
-v
117237-C Rev. A