Pvc Attributes; 117237-C Rev. A - Bay Networks Nautica 200 Reference Manual

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
[Save] device/pvc/PVC01#
7-56
Ext-Modem
ex
none
none, dtr, at
If DTR is set here then the modem will call a
pre-programmed internal number. IF AT is selected then
the user will set the number to be called using the AT
Command Set.

PVC Attributes

Once a WAN's mode has been changed to FrameRelaySync,
PVCs can be created for the WAN.
To create a PVC manually, use the following syntax:
new pvc/pvc
where is the NEW verb, and
new
create the new Permanent Virtual Circuit.
When [ ] is pressed, the PVC is created and numbered
ENTER
automatically, the Command Line moves directly into the PVC
for editing:
Note: This is the only time a PVC can be edited, they cannot be
altered once they have been created.
is the command to
pvc/pvc

117237-C Rev. A