Bay Networks Nautica 200 Reference Manual page 230
Nortel nautica 200: reference guide
Hide thumbs
Also See for Nautica 200:
- Reference manual (642 pages) ,
- Release note (38 pages) ,
- Installation manual (23 pages)
Table of Contents
Advertisement
NauticaRS Release 4.1 Reference Guide
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
7-48
There are several values that you can set:
•
Either: Either incoming PAP or CHAP are accepted
on this port.
•
PAP: Only incoming PAP is accepted.
•
CHAP: Only incoming CHAP is accepted.
•
BWPAP: Incoming and outgoing PAP is accepted.
•
BWCHAP: Incoming and outgoing CHAP is
accepted.
•
BWEither: Both incoming and outgoing PAP and
CHAP are accepted.
•
None: No profiles are used.
•
Custom Profile: A profile you have designed
yourself will be used. To design your own PPP
profiles, refer to Chapter 12.
FrMgmt
fr
none
none, lmi, ccita, ansid
This field is the type of Frame Relay local management
interface to be used between the unit and the frame relay
service provider. The Frame Relay Service Provider
should advise you of the management type used.
The options here are:
•
none: No Frame management.
•
LMI: Local Management Interface.
•
CCITA: Based on the ITU-T Q933 Annex A
(CCITT) standard as laid down by the Frame Relay
Forum.
•
ANSID: Based on the ANSI T1.617 Annex D
standard as laid down by the Frame Relay Forum.
117237-C Rev. A
Advertisement
Table of Contents
