Nautica Paths - Bay Networks Nautica 200 Reference Manual

Parameter:
MTC:
Default:
Options:
Function:
Instructions:

Nautica Paths

box# new pa nau/name
box# mod pa nau/wat1
box# del pa nau/wat1
117237-C Rev. A
NAT-Enabled
nat-e
no
no, yes
To enable or disable Network Address Translation
(NAT) on this path.
For more information on NAT, refer to Chapter 14.
The attributes for a Nautica Path are similar to those of an
Ethernet and PPP connection. To create a new Nautica path use
the following syntax:
where new is the NEW verb (page 17-21),
PAth context,
nau
and is the user name assigned to the Path.
name
To modify an existing nautica path, use the syntax above but
replace the verb with the
new
MODify verb (page 17-20). For example:
To remove a Nautica path from the router, use the same syntax
but replace the verb with the
DELete verb (page 17-12). For example:
specifies the Nautica Path Type
verb.
mod
verb.
del
Working with Paths
pa takes you into the
(Table
is the MTC for the
mod
is the MTC for the
del
4-1)
4-29