Bay Networks Nautica 200 Reference Manual page 407

Verb:
MTC:
Function:
Instructions:
Example:
box# bat
BATCH MODE
box# new pa ppp/wat2
box# isdn-n 1/987654
box# ipa 192.168.1.1 ipm 24
box# papi security
box# papo security
box# commit
[SAVE]path/ppp/wat3#
117237-C Rev. A
Batch
bat
Defer configuration changes until a commit verb is
entered.
Normally when configuration commands are entered,
they are implemented by the unit immediately,
regardless of whether they have been saved. BATch
mode allows these changes to be made without them
being instantly implemented.
This verb is used in conjunction with commit
17-8) and remove
The following command set shows how batch and
commit can be used to enter a list of configuration
commands. If you have a lot of changes to make, or are
creating a configuration script, BATch and commit are
the easiest way to enter large amounts of configuration
data.
In this example, the following commands have been
executed:
Command
box# bat
box# new pa ppp/wat2
Command-Line Verbs
(page 17-24).
Action
Turn on BATch mode
Create a NEW PPP path called
WAT2
(page
17-3