Bay Networks Nautica 200 Reference Manual page 305

box# new ipx ripf service
[Save] ripfilt/service#
117237-C Rev. A
If IPX Filtering is set to
(page 5-7), then all connections apart from those defined in the
table are allowed through the router. When set to
ForwardOnMatch
the table are allowed through. All others are rejected.
Note: If
ForwardOnMatch
contains both halves of the connection. This allows the router to
send and receive data between the connection pair.
A connection must also be allowed between the external address
of the client, and both the target file server internal and external
network addresses at each router in the link that has filtering
enabled.
Typing at the
lso -l
created already.
To create or modify a filter use the following syntax:
verb ipx ripf name
Where verb is the verb to be used,
moves you to the route filter context and
character name assigned to this filter.
For example, to create a new filter called service, the following is
typed at any prompt:
When this command is entered, BCC moves into the new
configured object:
RejectOnMatch
(page 5-7), only those connections defined in
is used, a filter must be added that
context will list any filters you may have
ipx#
NEW
Using IPX
in the level
system#
, MOD , DEL etc.,
is a 0 to 8
name
ipx ripf
9-17