Bay Networks Nautica 200 Reference Manual page 102
Nortel nautica 200: reference guide
Hide thumbs
Also See for Nautica 200:
- Reference manual (642 pages) ,
- Release note (38 pages) ,
- Installation manual (23 pages)
Table of Contents
Advertisement
NauticaRS Release 4.1 Reference Guide
[Save] bcc> save
Config saved
bcc>
bcc> co lso -l
bcc> co lso -l
device/box/Nautica4000
device/eth/LAN01
device/wan/WAN01
device/bri/ISDN-TA01
device/isdn/ISDN01
device/pri/ISDN-PRI01
path/eth/LAN01
path/nau/RemoteNautica
path/ppp/RemotePPP
box#
3-24
After the Quick Setup option has run, and the configuration
changes are saved, it is important to be aware what has happened
to the router. Read the next section for information on what
happens now.
After Quick Setup
Once setup is complete, a path called RemotePPP is created if
you answered Yes to the PPP question in the Quick Setup. If you
answered No to PPP, a path called RemoteNautica is created.
These are the paths by which you connect to the remote router
specified by an ISDN number during the setup procedure.
Note:
The RemotePPP path may be automatically renamed if
the unit is CHAP challenged on the first call. When a
RemoteNautica path comes up for the first time, the name is
always changed automatically.
To view these paths, type:
A list of all the devices and paths appears on the screen:
117237-C Rev. A
Advertisement
Table of Contents
