Nqa; Nqa Agent Enable - HP 6125XLG Command Reference Manual

nqa

Use nqa to create an NQA operation and enter its view.
Use undo nqa to remove the operation.
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
Default
No NQA operation is created.
Views
System view
Predefined user roles
network-admin
Parameters
admin-name: Specifies the name of the administrator who creates the NQA operation, a case-insensitive
string of 1 to 32 characters excluding hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters excluding
hyphens (-).
all: Removes all NQA operations.
Usage guidelines
If the operation type has been configured for the operation, this command directly places you to NQA
operation view.
After you configure the scheduling parameters for the operation, you cannot enter NQA operation view
or any operation type view. You cannot deploy any NQA operation related parameters through IMC
either. To modify the operation settings, you must first stop the operation.
Examples
# Create an NQA operation with administrator name admin and operation tag test, and enter NQA
operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]

nqa agent enable

Use nqa agent enable to enable the NQA client.
Use undo nqa agent enable to disable the NQA client and stop all operations being performed.
Syntax
nqa agent enable
undo nqa agent enable
127