Nortel DMS-100 Series Reference Manual page 86

3-62 Datafilling BAS on RSC-S International
Basic call processing
Datafill example for table LTCPSINV
Sample datafill for table LTCPSINV appears in the following example.
MAP display example for table LTCPSINV
Table: LTCPSINV
LTCNAME
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PLGC 1
(0 D30 D30RCO2 N) (1 D30 D30RCO2 N) (2 D30 D30RCO2 N)
(3 D30 D30RCO2 N) (4 D30 DEFAULT N) (5 D30 DEFAULT N)
(6 D30 DEFAULT N) (7 D30 DEFAULT N) (8 NILTYPE) (9 NILTYPE)
(10 NILTYPE) (11 NILTYPE) (12 NILTYPE) (13 NILTYPE)
(14 NILTYPE) (15 NILTYPE) (16 NILTYPE) (17 NILTYPE)
(18 NILTYPE) (19 NILTYPE)$
Datafilling table RCCINV
Table remote cluster controller inventory (RCCINV) contains inventory
data, except P-side link assignments for the RCO2. The C-side PCM-30
assignments for the RCO2 are entered in table RCCINV.
The datafill for table RCCINV appears in the following procedure. This
procedure only contains fields that apply to basic call processing. Refer to
the data schema section of the Translations Guide for a description of the
other fields. Field FRTYPE contains new values. A field is added that
contains the name of the loadfile that associates with the EEPROM.
The addition of the NILPORT option to the CSLNKTAB field of table
RCCINV provides the ability to skip links. The NILPORT option allows
ports to be skipped when an RCO2 C-side PCM-30 link is entered. Datafill
NILPORT if a port must remain unequipped.
297-8331-815 Standard 10.01 August 1999
(continued)
PSLNKTAB
Note: When you change delete, replace, or add a C-side link, the link
affected and all links that follow must be busied. The links must be
busied before modifications can be made in table RCCINV.
CONTMARK