Nortel DMS-100 Series Reference Manual page 324

4-74 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Error messages for table LCMINV
The following error messages occur when you enter data in table LCMINV.
Error messages for table LCMINV
Error message
RCO2 is connected to an
LCM/LCME only.
Datafilling table Remote Maintenance Module Inventory (RMMINV)
Table RMMINV identifies the following:
The system dynamically allocates memory. The maximum size of this table
is 255 entries.
The CSPMINFO field of an RMM can be an RCO2 and the PLGC/LGCO or
RCC. You must define the C-side links of RMM to links 22 and 23 of the
RCO2.
The datafill for table RMMINV appears in the following table. The table
contains the fields that apply to basic call processing. Field FRTYPE
contains current values. Refer to the data schema section of the Translations
Guide for a description of the other fields.
297-8331-815 Standard 10.01 August 1999
(continued)
an RLCM
an RSC-S
an OPM site with:
— the frame type
— the frame number
— the floor
— the row
— the frame position
a PEC
a PM load and executive program loaded
a C-side PM attached to each RMM.
Explanation and action
This message indicates that the
RCO2 can connect on P-side links to
an LCM or LCME (phase one).