Nortel DMS-100 Series Reference Manual page 383

Datafill example for table CARRMTC
The following example describes sample datafill for the PCM-30 RSC-S R1
Trunking package in table CARRMTC.
MAP example for table CARRMTC
Datafilling table RCCINV
Table remote cluster controller inventory (RCCINV) contains inventory data
for the RCO2. Table RCCINV does not include P-side link assignments.
The following procedure describes the datafill for table RCCINV. The fields
that apply directly to PCM-30 R1 Trunking appear. Refer to the data
schema section of the Translations Guide for descriptions of the other fields.
Datafilling table RCCINV
Subfield or
Field
refinement
RCCNAME
SITE
PMTYPE
RCCNO
LOAD
Note: When you enter data in field C-side link table (CSLNKTAB), do not assign message links to
the same interface card. When the interface card supports two or more links, separate the message
links by the number of links on the interface cards. This condition applies to all interface link types;
DS-1, DS30, DS30A, or PCM-30. Table control generates a warning when an attempt occurs to
assign message links on the same interface card. When this condition occurs and the card fails, an
E1 outage can occur. An E1 outage is a failure of all message links.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Table: CARRMTC
CSPMTYPE TMPLTNM RTSML RTSOL
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
RCO2 DEFAULT 255 255 D30 NTMX82AA A_LAW INTERNATL 100 100 150 150 200
200 220 220 50 50 50 50 100 100 100 120 120 130 130 140 140 100 200 200
Y 4 4 17 255 Y Y 5 5 205 914 G714 D30RCC
Entry
see subfields
alphanumeric
RCO2
0 to 127
alphanumeric
Datafilling PCM-30 trunks on RSC-S UK / Europe 4-133
PCM-30 R1 Trunking
Explanation and action
RCO2 name. Contains subfields SITE,
PMTYPE, and RCCNO.
Site. Enter the site name assigned to the
remote location. This entry must also appear in
table SITE.
Peripheral module type.
RCO2 number. Office numbers are different.
Load. Enter the load for the RCO2. Table
PMLOADS must contain this datafill.
(continued)
ATTR