Nortel DMS-100 Series Reference Manual page 44

3-20 Datafilling BAS on RSC-S International
Basic call processing
Datafilling data in table OFRT
Subfield or
Field
refinement
CONDRTE
RTETYPE
RTEREF
SKIPNUM
CONDRTE EXTREID
(continued)
TABNAME
INDEX
Note 1: Enter a plus sign (+) for field CONTMARK when the next record specifies more data for a
route list. Enter a dollar sign ($) for field CONTMARK when a record is the last record for the list.
Note 2: Enter data in field SITE after you enter data in table SITE. Table SITE must already define
an entry in field SITE.
297-8331-815 Standard 10.01 August 1999
(continued)
(continued)
Entry Description
refer to If a match selects the following subfields in
subfields CNDSEL, these subfields: RTETYPE, RTEREF,
SKIPNUM, EXTREID, TABNAME and INDEX
define the conditional route.
ST, SK,T Route type of the selected transfer.
Refinements are another route list in the same
table (ST), skip (SK) entries in route table and
route to specified table (T) and index. Refer to
the following entries.
1 to 1023 ST, same table specified. Enter in field
RTEREF the number of the route reference
element to transfer call routing.
0 to 7 SK, skip in same table specified. Enter into field
SKIPNUM the number of elements to skip in the
route reference list.
refer to T, transfer to index in table specified. Contains
subfields subfields TABNAME and INDEX. Perform next
entries.
OFRT, OFR2 TABNAME. Enter the office route table name.
OFR3, OFR4
1 to 1023 INDEX. Enter the route reference index
number in the office route table.
—end—