Nortel DMS-100 Series Reference Manual page 295

Datafilling table PMLOADS
Subfield or
Field
refinement
LOADNAME
ACTFILE
ACTVOL
BKPFILE
BKPVOL
UPDACT
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S UK / Europe 4-45
Basic call processing
Entry Explanation and action
alphanumeric Peripheral module load name. Enter the XPM
load name. Range is a maximum of 32
characters. This loadname must be the same
as the load name entered in tables LTCINV and
RCCINV.
alphanumeric Active load file name. The name of the active
XPM loadfile. This came can be the original
loadfile or a patched loadfile. The range is a
maximum of 32 characters. Before patching,
this name is the original load name. The XPM
load file patching updates the field after the load
is patched for a period of time. The period of
time is called soak time.
alphanumeric Active volume. Identifies the device that stores
the active loadfile. Range is the set of disk
drive unit (DDU) volumes and system load
module (SLM) disks available to the CM,
S00DXPM. The range is a maximum of 16
characters.
alphanumeric Backup load file name. Identifies the name of
the backup XPM loadfile. The BKPFILE name
should be the same name as the LOADNAME
field. The range is a maximum of 32
characters.
alphanumeric Backup volume. The device that stores the
backup loadfile. The range is the set of DDU
volumes and SLM disks available to the CM,
S00DXPM. The range is a maximum of 16
characters.
Y or N Update active filename. Controls if the loadfile
is eligible for loadfile patching. Controls if the
patchfile loadfile name can update PMLOADS
fields ACTFILE and ACTVOL.
(continued)