Nortel DMS-100 Series Reference Manual page 323

Datafilling table LCMINV
Subfield or
Field
refinement
RINGDATA RNGTYPE
(continued)
LCDI_INFO
Note 1: The LCM link information that appears starts with link 0. The C-side peripheral links are in
parentheses.
Note 2: When you enter fields link information (LNKINFO) or link map (LNKMAP), make sure the
message links are not assigned to the same interface card. When the interface card supports a
minimum of two links, separate the message links by the number of links on the interface cards.
This action applies to interface link types DS-1, DS30, DS30A, or PCM-30. Table control issues a
warning when you attempt to assign message links on the same interface card. When you assign
message links to the same interface card, an E1 outage can occur if the card fails. An E1 outage is
a failure of all message links.
Entry example for table LCMINV
A sample entry for table LCMINV appears in the following example.
MAP display example for table LCMINV
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Entry
refer to list
0 to 63
Table: LCMINV
LCMNM FRTYPE
––––––––––––––––––––––––––––––––––––––––––––––––––––––
MELB 02 0 CRSC
CSPMNO BICTST MEMSIZE
––––––––––––––––––––––––––––––––––––––––––––––––––––––
RCO2 0 N 56
––––––––––––––––––––––––––––––––––––––––––––––––
C3C (12) (14) (13) (15)
Note: The in field LOAD represents alphanumeric, for example,
xx
Datafilling BAS on RSC-S UK / Europe 4-73
Basic call processing
Explanation and action
Ringing type. Improvements are
RNGCADENCE, FREQUENCIES, and
PROMVOLT.
Line concentrating device ISDN information. A
maximum of 18 vectors of link numbers (0to 63)
of the C-side peripheral in this case the RCO2.
—end—
SHPOS FLOOR ROW FRPOS
4 3 D
LCMTYPE
256K 256K LCME
$
(continued)
EQPEC LOAD
1 BX30AB LCME06AW
Y
.
B1