Nortel DMS-100 Series Reference Manual page 479

Remote Switching Center Multi-access (RSC-M)
Datafilling table CLLI
Subfield or
Field
refinement
CLLI
PLACE
PROV
BLDG
TRAFUNIT
SUFX
ADNUM
TRKGRSIZ
Note 1: The SIZE field in table data size (DATASIZE) allocates memory for the entry with field
DATSKEY equal to CLLI.
Note 2: The maximum number of CLLI codes is 8192.
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-19
Entry Description
refer to Common language location identifier. This
subfields 16-character field identifies the far end of each
announcement, tone, trunk group, test trunk,
national milliwatt test lines, and service circuit.
alphanumeric Place. This four-character code identifies the
name of the city or town at the far end of each
group.
alphanumeric Province or state. This two-character code
identifies the province or state at the far end of
the trunk group.
alphanumeric Building. This two-character code identifies the
building number at the far end of the trunk
group.
alphanumeric Traffic unit. This three-character code identifies
the destination of the traffic unit at the far end of
the trunk group.
alphanumeric Suffix. This one-character code identifies trunk
groups that terminate at the same CLLI
location.
0 to a Administrative trunk group number. Enter a
number one number from 0 to a number one less than the
less than the value of table CLLI, that appears in table
size of table DATASIZE. The value must be different.
CLLI that
appears in
table
DATASIZE
0–2047 Trunk group size. This four-character field is
equal to the maximum quantity of trunk
members expected to be assigned to the trunk
group.
—continued—
(continued)