Nortel DMS-100 Series Reference Manual page 51

Extended peripheral module
Hide thumbs Also See for DMS-100 Series:
Table of Contents

Advertisement

Table RCCPSINV contains the P-side link assignments for an RCO2. When
you add a tuple in table RCCINV, the system adds a corresponding tuple in
table RCCPSINV. Table RCCPSINV uses field LOAD to identify load
information. The LOAD corresponds to the LOADNAME tuple from table
PMLOADS. The field CARRIDX indexes to table CARRMTC for
maintenance control information about the peripheral. The RCCNAME
tuple in table RCCPSINV corresponds to the RCCNAME tuple from table
RCCINV. The RCCNAME tuple in table RCCPSINV stores site
information originally entered in field NAME from table SITE, the PM type,
and PM number.
Table RMMINV identifies a remote RLCM, RSC-S, or outside plant module
(OPM) site with one of the following:
frame type
frame number
floor
row
frame position
product engineering code (PEC)
PM
executive program loads
C-side PMs
These data attach to each remote maintenance module (RMM). Subfield
SITENM in table RMMINV corresponds to field NAME in table SITE.
This field identifies the equipment for the switching unit and the remote
locations that use the switching unit. The LOAD field in table RMMINV
corresponds to the LOADNAME tuple from table PMLOADS. The LOAD
field stores the device location of each PM load file.
Table LCMINV lists data assignments for each bay for a local line
concentrating module (LCM) or remote line concentrating module (RLCM)
unit. Field SITE in table LCMINV corresponds to the NAME tuple from
table SITE. Field SITE identifies the equipment for the switching unit and
for the remote locations that use the switching unit. Field LOAD in table
LCMINV corresponds to the LOADNAME tuple from table PMLOADS.
Field LOAD stores the device location of each PM load file.
Table TRKGRP defines data for each trunk group for a switching unit. Field
CLLI in table TRKGRP corresponds to the CLLI code for the trunk group.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S International 3-27
Basic call processing
(continued)

Advertisement

Table of Contents
loading

Table of Contents