Nortel DMS-100 Series Reference Manual page 341

Datafilling table ALMSC
Subfield or
Field
refinement
NORMALST
REPORT
ALM
LOGIC
LOGIC
SDFUNCT
ALMGRP
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Entry
0 or 1
Y or N
refer to list
refer to
subfields
Y or N
alphanumeric
Y or N
—continued—
Datafilling BAS on RSC-S UK / Europe 4-91
Basic call processing
Explanation and action
Normal state. Enter the normal state of the
scan point. Entry value is 0, if the scan point is
normally off or open. Entry value is 1 if the scan
point is normally on or closed.
Alarm report. Enter Y if the system must log an
alarm report. If the system must not log an
alarm report, enter N.
Alarm type. Enter the type of alarm to activate.
The entry values are:
CR (critical alarm)
MJ (major alarm)
MN (minor alarm)
NA (no alarm)
Logic. This field contains the following
subfields:
LOGIC
SDFUNCT
ALMGRP
ALMXFR
CONTMARK
Logic. Enter Y if the logic associated with the
function is fixed. If the logic is not fixed, enter
N.
Signal distributor function. Enter the signal
distributor function or functions associated with
a specified scan point.
Alarm grouping. Enter Y if the system activates
alarms when the system activates the alarm
grouping key. Enter N if the state of the alarm
grouping key does not affect the active state of
the alarm function.
(continued)