Nortel DMS-100 Series Reference Manual page 195

Datafilling table LTCPSINV
Table line trunk controller P-side link inventory (LTCPSINV) contains
P-side assignments for host peripheral links. You can enter these links as
DS30A, D30, or DCH. The key for this table is the same as for table
LTCINV. The system automatically allocates memory for a maximum of
128 tuples. The system automatically adds an entry when you enter a PM in
table LTCINV.
The carrier type is set in this table. The value entered after D30 is the same
value you enter in table CARRMTC. The operating company can choose
the value to use.
The datafill example for table LTCPSINV shows only fields that apply to the
ISDN on RSC. Refer to the data schema section of the Translations Guide
for a description of the other fields.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Note: You must enter data in table LTCPSINV after you enter data in
tables CLLI, SITE, PMLOADS, LTCINV, and CARRMTC. Examples
of datafill for tables CLLI, SITE, PMLOADS, and CARRMTC appear in
the basic call processing section for the RSC-S.
3-171 Datafilling ISDN on RSC-S International
ISDN operations
ISDN operations
3-171 3-171
(continued)
(continued)