Nortel DMS-100 Series Reference Manual page 346

4-96 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Datafilling table Metallic Test Access Vertical Connection Table
(MTAVERT)
Table MTAVERT identifies the vertical connection to the MTA matrix. Two
connection types can occur. The connection types are single and multiple.
A maximum of 32 LCMs can share a metal test pair.
The datafill for table MTAVERT appears in the following table. The table
contains the fields that apply to basic call processing. Refer to the data
schema section of the Translations Guide for a description of the other
fields.
Datafilling table MTAVERT
Subfield or
Field
refinement
VERT
VERTCONN
SELECTOR
SITE
FRAME
UNIT
CONTMARK
297-8331-815 Standard 10.01 August 1999
(continued)
Entry Explanation and action
20 to 27 Vertical. Enter the MTA vertical connection
number.
S or M Vertical connection. Enter M for multiple
connections and S for single connections. A
maximum of 32 LCM modules can share a
metal test pair.
O Selector type. You can only use selector O
when the entry in VERTCONN is M. You must
enter subfields SITE, FRAME, UNIT, and
CONTMARK after the selector. This selector is
a vector of a maximum of 32 entries.
alphanumeric Site name. Enter the name selected for the
remote location.
Frame number. Enter the frame number.
0 or 1 Unit number. Enter the unit number.
+ or $ Continuation mark. Enter a plus sign (+) when
the record that follows specifies additional data.
When the record does not specify additional
data, enter a dollar sign ($) after last record.