Nortel DMS-100 Series Reference Manual page 184

3-160 Datafilling ISDN on RSC-S International
ISDN operations
Limits
The ISDN operations require that the PM type be entered as PLGC for an
LGCOi+.
Plain ordinary telephone service (POTS) lines on a DMS-100G switch do
not support the ESA warm exit.
Interactions
The requirements for the use of ISDN enhanced D-channel features are as
follows:
Activation/deactivation by the end user
The ISDN operations do not require activation or deactivation by the end
user.
Billing
The ISDN operations do not affect billing.
Station Message Detail Recording
The ISDN operations do not affect Station Message Detail Recording.
297-8331-815 Standard 10.01 August 1999
(continued)
The RCO2 must have the NTMX77 Unified Processor (UP) card or the
optional NTAX74 Cellular Access Processor (CAP) card.
Note: The NT7X05 Peripheral/Remote Loader-16 (PRL) functionality
requires the NTMX77 up for support. An RCO2 equipped with the
optional NTAX74 CAP does not support NT7X05 PRL functionality.
The RCO2 must have an enhanced ISDN signal processor card
(NTBX01BA).
Note: An RCO2 equipped with the NTAX74 CAP requires the
NTBX01BA.
The RCO2 must have an enhanced D-channel card (NTBX02BA).
Note: An RCO2 equipped with the NTAX74 CAP requires the
NTBX02BA.
The table DCHINV tuple DECPEC must contain NTBX02BA card
information.
Note: The system does not permit changes to the DCHPEC code with a
ISDN service group attached. Make the DCH a spare DCH before the
tuple change.