Nortel DMS-100 Series Reference Manual page 413

Datafilling table LTCPSINV
Subfield or
Field
refinement
LTCNAME XPMNO
(continued)
PSLNKTAB
PSLINK
PSDATA
AREASELCT
Note 1: The AREASELCT value that you choose determines the datafill for the subfields in
PSDATA. If AREASELCT is DS30A, DCH, or NILTYPE, other fields do not require datafill. If
PSDATA is D30, enter data in subfields CARRIDX and ACTION.
Note 2: The system can define only three DCHs in ports 1, 9, and 17 in an RCO2 main shelf
without an extension cabinet. The system can define an additional seven DCHs in an RCO2 with an
extension cabinet. The system allows a DCH on links 1, 9, 10-15, and 17-21.
Note 3: A DCH on link 1, 9, or 17 causes the system to not allow a PCM-30 on specified ports.
These ports are 1-8, 9-15, and 17-21.
Note 4: Make changes to fields with multiple entries in PROMPT mode only.
Datafill example for table LTCPSINV
Sample datafill for table LTCPSINV appears in the following example.
MAP example for table LTCPSINV
LTCNAME
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PLGC 1 (0 NILTYPE) (1 DCH) (2 NILTYPE) (3 NILTYPE)
(4 NILTYPE) (5 NILTYPE).(6 NILTYPE) (7 NILTYPE) (8 NILTYPE)
(9 D30 ESFB8ZS N) (10 NILTYPE) (11 NILTYPE) (12 NILTYPE)
(13 NILTYPE) (14 NILTYPE) (15 NILTYPE) (16 NILTYPE)
(17 NILTYPE) (18 NILTYPE) (19 NILTYPE)
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Entry
0 to 255
refer to
subfields
1, 9, 17
refer to
subfield
DCH
—end—
PSLNKTAB
Datafilling ISDN on RSC-S UK / Europe 4-163
ISDN operations
Explanation and action
PM number. Contains the unit number of the
PLGC in field XPMNO of table LTCINV.
P-side link table. Contains subfields PSLINK,
PSDATA, and CONTMARK.
Vector of P-side ports. Enter the P-side port
number to enter. You must enter the D-channel
handler (DCH) in odd ports.
P-side data. Contains subfield AREASELCT
P-side data. Enter D30 for trunks and remote
nodes. Enter DS30A for P-side interface to a
local LCM. The DCH interface ISDN loops.
(continued)
CONTMARK
$