Nortel DMS-100 Series Reference Manual page 221

Datafilling table LTMAP
Table logical terminal map (LTMAP) maps ISDN LTs to a LEN or the TEI,
depending on the AP, from table LTDEF.
The datafill example for table LTMAP shows only the fields that apply to
the ISDN on RSC-S. Refer to the data schema section of the Translations
Guide for a description of the other fields.
Datafilling table LTMAP
Subfield or
Field refinement
LTKEY
LTGRP
LTNUM
MAPTYPE
LEN
OPTION
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling ISDN on RSC-S International 3-197
CAUTION
Use the Service Order system to add and delete tuples to
and from table LTMAP.
Do not use the table editor to add or delete tuples. The
table editor can result in the assignment of incompatible
features to the line. This table datafill appears here for
information only.
Entry Explanation and action
Logical terminal key. Subfields: LTGRP and
LTNUM.
alphanumeric Logical terminal group. Enter the LT group
name from table LTGRP. This group contains a
maximum of eight characters or digits.
1 to 1022 Logical terminal number. Enter the LT number
in the group.
LEN Terminal mapping type. Subfields: CLLI or
LEN that identify the terminal.
see subfields LEN for LCME. Subfields: SITE, FRAME,
UNIT, LSG, and CIRCUIT.
see list Option. The option based on the terminal AP
selected. Use the TEI for B- and BD-type
terminals. Use the PHI for packet handler
interface. Use the BCH for high-speed packet
data terminals, type B1 or B2. Use the
DCHCHNL for D-channel.
—continued—
ISDN operations
(continued)