Nortel DMS-100 Series Reference Manual page 178

3-154 Datafilling ISDN on RSC-S International
ISDN operations
297-8331-815 Standard 10.01 August 1999
(continued)
Table LTCINV contains inventory data for PM types. The P-side link
assignment of table LTCINV does not contain inventory data for PM
types. This table defines the PCM-30 line group controller (PLGC) or
line group controller overseas (LGCO) on the C-side of the RCO2. Load
information for this table is entered in field LOAD. Load information
for this table corresponds to the LOADNAME tuple from table
PMLOADS.
Table LTCPSINV contains the assignment of the P-side links for PMs.
If AREASELCT contains the D30, the CARRIDX field indexes table
CARRMTC for maintenance control information about the peripheral.
Field XPMNO in table LTCPSINV corresponds to field PMNO in table
SPECCONN. Field XPMTYPE corresponds to field PMTYPE in table
SPECCONN.
Note: The RSC-S can be configured with either the PLGC or the
LGCO. In either occurrence, use
Field LTCNAME in table LTCINV corresponds to the LTCNAME field
in table LTCPSINV.
Enter load information in field LOADNAME. Enter corresponding
entries in field LOAD for tables LTCINV, LCMINV, and RMMINV.
Table RCCINV maintains a list of RCO2s entered in the DMS switch.
Table RCCINV contains inventory data, for the RCO2s. Table RCCINV
does not contain P-side link assignments. The table information
identifies the location of the RCO2, the load and execute lineups
required, and the network link connections. Enter the C-side PCM-30
assignments for the RCO2 in table RCCINV. In addition, enter
intraswitching in table RCCINV.
as the datafill entry.
PLGC