Nortel DMS-100 Series Reference Manual page 410

Extended peripheral module

Hide thumbs Also See for DMS-100 Series:

Table of Contents

4-160 Datafilling ISDN on RSC-S UK / Europe

ISDN operations

Datafilling table LTCINV for ISDN on RSC-S International

Note 1: When the table supports NI-1, make sure that the user entered ISP in the OPTCARD. The

ISP is the designator of the enhanced EISP (NTBX01BA) card.

Note 2: Make changes to fields with multiple entries in the PROMPT mode.

297-8331-815 Standard 10.01 August 1999

alphanumeric

TONESET. Enter UK100. Range of values

includes DEFAULT, NORTHAM and UK100.

Processor equipment product engineering

codes. One PEC is necessary for each PLGC

or LGCO unit. Enter the PEC for unit 0 first.

The PEC must reflect the minimum firmware

capabilities in the processor complex of each

EEPROM loadfile name. Contains the name of

the loadfile loaded in the NTMX77AA EEPROM.

For 6X40 equipment PEC. Enter the version of

the NT6X40 to be used. The 6X40AC is the

required version for ISDN.