Nortel DMS-100 Series Reference Manual page 321

Datafilling table Line Concentrating Module Inventory (LCMINV)
Table LCMINV lists data assignment for each bay associated with a local or
remote LCM unit. The only field that is different for the RSC-S
configuration is SITE.
The datafill for table LCMINV appears in the following table. The table
contains the fields that apply to basic call processing. Field FRTYPE
contains current information. Refer to the data schema section of the
Translations Guide for a description of the other fields.
Datafilling table LCMINV
Subfield or
Field
refinement
LCMNM
SITE
FRNO
UNITNO
FRTYPE
Enter the location of the RCO2 in fields FRNO, SHPOS, FLOOR, ROW, and FRPOS.
EQPEC
LOAD
Note 1: The LCM link information that appears starts with link 0. The C-side peripheral links are in
parentheses.
Note 2: When you enter fields link information (LNKINFO) or link map (LNKMAP), make sure the
message links are not assigned to the same interface card. When the interface card supports a
minimum of two links, separate the message links by the number of links on the interface cards.
This action applies to interface link types DS-1, DS30, DS30A, or PCM-30. Table control issues a
warning when you attempt to assign message links on the same interface card. When you assign
message links to the same interface card, an E1 outage can occur if the card fails. An E1 outage is
a failure of all message links.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S UK / Europe 4-71
Basic call processing
Entry Explanation and action
Refer to Line concentrating module name. Enter the
subfields LCM name. This field contains subfields SITE,
FRNO, and UNITNO.
alphanumeric Site. Enter the site name assigned to the
remote location. The SITE is a subfield of field
LCMNM.
0 to 511 Frame number. Enter the LCM frame number.
0 to1 Unit number. Enter the LCM unit number.
Refer to list Frame type. Enter the frame type that contains
the peripheral module equipment. Enter CRSC
for the RCO2 shelf. Enter CEXT for the RCO2
extension shelf.
BX30AB Equipment PEC. Enter the PEC BX30AB for
the LCME.
alphanumeric Load. Enter the load for the LCM.
—continued—
(continued)