Nortel DMS-100 Series Reference Manual page 168

3-144 Datafilling ISDN on RSC-S International
ISDN operations
Note: This list of required packages does not include feature packages
NTX143AA, NTX150AA, NTX381AA, and NTXP92AA.
International support requires the following feature packages:
Description
The integrated services digital network (ISDN) is provided through the
Remote Cluster Controller Offshore #2 (RCO2) module of the Remote
Switching Center Synchronous Optical Network (SONET), or RSC-S. An
RCO2 provides increased ISDN performance capacity.
All the packages required for the RSC-S without ISDN are also required for
the RSC-S with ISDN. The non-ISDN packages provide many of the base
functionalities. Examples of base functionalities are intraswitching and
emergency stand-alone (ESA). The RSC-S with ISDN expands on these
base functionalities.
This section addresses datafill parameters that define:
297-8331-815 Standard 10.01 August 1999
(continued)
NTXH52AA PCM-30 RSCO Support
NTXP92AA RSC-S Basic
NTX001AA Common Basic
hardware components used in the RCO2 configuration
the extension shelf
the names and attributes of the PCM-30 and trunk data links between the
components of the RCO2
D-channel data connections
optional card (ISP16) for the RCO2
attributes of ISDN service capabilities
card type requirements and table datafill necessary in order to implement
National ISDN (NI-2) enhanced D-channel data
NI-2 support for malicious call trace (MCT) in the Australian market
bearer capability services (BS) that provide a way to screen calls so that
communication attempts between incompatible stimulus terminals
cannot occur
ISDN protocol version control (PVC) to implement support of A-Law
for NI-2 speech and 3.1 kHz bearer services, and variable length
directory number (DN) screening