Nortel DMS-100 Series Reference Manual page 369

Datafilling table ESAPXLA
The ESA trunk translations tables support call processing during ESA. This
call processing consists of line-to-trunk, trunk-to-trunk, and trunk-to-line
call processing in the RSC-S. Table ESAPXLA contains special prefix
translation data for POTS and MDC customers.
The system does not use this table during normal RCO2 operation.
Translations occur in a normal method. If loss of communication with the
host occurs and the RCO2 enters ESA, the system uses this table in the
prefix translations.
The datafill for the ESAPLXA table appears in the following table. Only
the fields that apply directly to RSC-ESA lines appear. Refer to the data
schema section of the Translations Guide for a description of the other
fields. Note that data entries for table ESAPXLA must occur before table
CUSTHEAD.
Datafilling table ESAPXLA
Subfield or
Field
refinement
PXLAKEY
XLANAME
NODE
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling ESA lines and trunks on RSC-S UK / Europe 4-119
Note: The in field LOAD stands for two letters, for example,
xx
Entry
refer to
subfields
alphanumeric
refer to
subfields
ESA lines and trunks
Explanation and action
Prefix translator key. This key identifies a set of
prefix digits on a certain site for a given set of
customers. This key contains subfields
XLANAME, NODE, and PREFIX.
Prefix translator name. For performance of this
translation for any POTS line on the remote,
enter ESAPOTS. For performance of this
translation for a specified MDC customer group,
enter any name with a maximum of eight
characters. Relate this name to a customer
group in table CUSTHEAD.
Node. The RLCM, RCC, RCO2, or remote
digital line module (RDLM) associated with the
translator that XLANAME identifies. The NODE
contains subfields PMTYPE, LCMNO, SITE,
and RCCNO.
—continued—
(continued)
.
BZ