Nortel DMS-100 Series Reference Manual page 422

4-172 Datafilling ISDN on RSC-S UK / Europe
ISDN operations
Datafilling table ISGDEF
Subfield or
Field
refinement
ISGNO
PMTYPE
PMNO
SERVICE
CHNLTAB
Note 1: Make changes to fields with multiple entries in the PROMPT mode only.
Note 2: For DCH sparing, this table does not contain data for the card to use as the spare. The
absence of datafill in table ISGDEF automatically causes the card to become spare.
297-8331-815 Standard 10.01 August 1999
(continued)
Entry
0 to 255
RCO2
0 to127
BRA
refer to
subfields
—continued—
Explanation and action
Integrated services group number. Enter the
number of the DCH card in the PM.
PM type. Enter the PM that supports the DCH
services. Enter PLGC, LGCI, LTCI, or RCO2.
Peripheral module number.
Service. Enter the services the ISG provides.
The entry value is basic rate access (BRA).
Channel information. This field is a vector with
a maximum of 32 entries that specify the
functions of each channel. This field contains
subfields DCHNL and CHNLTYPE. If you make
less than 32 entries use a dollar sign ($) to
terminate this field.
Note: You must assign BD channels in
descending order starting at 31. You must
assign BRA channels in ascending order
starting at 0. The system restricts the order of
datafill for BD and BRA channels as follows:
For one night process (ONP), the warning
message "BD channels must be
higher than any BRA channels"
appears. This message informs operating
company personnel of the incorrect data
ordering in the tuple transferred. The table
on the new side accepts the tuple.
For non-ONP, the error message "BD
channels must be higher than any
BRA channels" appears. This message
informs operating company personnel of the
incorrect data ordering in the tuple. The
tuple is rejected.