Nortel DMS-100 Series Reference Manual page 326

4-76 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Datafilling table RMMINV
Subfield or
Field
refinement
CSIDPORT
Entry example for table RMMINV
A sample entry for table RMMINV appears in the following example.
MAP display example for table RMMINV
Error messages for table RMMINV
The following error messages can occur when you enter data in table
RMMINV.
Error messages for table RMMINV
Error message
RMM can be defined on P-side
links 22 and 23
297-8331-815 Standard 10.01 August 1999
(continued)
Entry
22,
23
Table: RMMINV
RMMNAME FRTYPE FRNO SHPOS FLOOR ROW FRPOS
–––––––––––––––––––––––––––––––––––––––––––––––––––
MELB RMM 0 CRSC
MELB RMM 2 CEXT
EQPEC LOAD
–––––––––––––––––––––––––––––––––––––––––––––––––––
6X13AA RMM34C
6X13AA RMM34C
Explanation and action
Note: If the field RMMSELECTOR is
RMMRCO2, enter subfield CSIDPORT as
follows.
C-side PORT. Enter the C-side port connected
to the RMM. Enter one tuple with 22 and one
tuple with 23. Refer to datafill example.
—end—
0 19 3
2 19 3
EXECS CSPMINFO
RSMEX RMMRCO2 RCO2 0 22
RSMEX RMMRCO2 RCO2 0 23
Explanation and action
This message indicates only P-side
links 22 and 23 of the RCO2 can
define the RMM.
C 51
G 52