Nortel DMS-100 Series Reference Manual page 139

Field RCCNAME stores the original site information entered in the field
NAME from table SITE, the PM type and the PM number.
Limits
The following limits apply to ESA lines and trunks:
Interactions
The ESA lines and trunks do not have functionality interactions.
Activation/deactivation by the end user
The ESA lines and trunks do not require activation or deactivation by the
end user.
Billing
The ESA lines and trunks do not affect billing.
Station Message Detailed Recording (SMDR)
The ESA lines and trunks feature package does not affect SMDR.
Datafilling office parameters
The office parameters that ESA lines and trunks use appear in the following
table. For additional information about office parameters, refer to Office
Parameters Reference Manual.
Office parameters that ESA lines and trunks use
Table name Parameter name
OFCENG RSC_ESA_NOTIFY_TONE
RSC_XPMESAEXIT
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling ESA lines and trunks on RSC-S International 3-115
When you enter data in table ESAPXLA for POTS, each RSC-S can
have a maximum of 16 entries.
You can enter data in table ESAPXLA for MDC customer groups.
When this event occurs, each prefix translator name for each RSC-S can
have a maximum of eight entries.
The system does not support ESA warm exit on plain ordinary telephone
service (POTS) lines on a DMS-100G switch.
ESA lines and trunks
Description
Defines when the subscriber hears a tone
burst when the RCO2 enters ESA.
Default: N
Delays ESA exit to make sure links do not
bounce. Default: 6
(continued)