Nortel DMS-100 Series Reference Manual page 507

Remote Switching Center Multi-access (RSC-M)
Field selector (SEL) contains the definition for data selection for CAS
interfaces. If CAS is selected, read-only information appears. This
information is about RSC-M P-side links.
Before you delete a tuple from table GPPTRNSL, make sure that lines do
not connect to the RSC-M in table LNINV. To delete the AMCs on a
RSC-M, delete one or more of the tuples for that RSC-M in table
GPPTRNSL. The group number specified is not important. A message
requests confirmation to delete, reject, or edit this tuple. After confirmation,
the switch deletes the tuples that remain for that RSC-M. A message
indicates the deleted tuples.
For CAS interfaces, enter one tuple in table GPPTRNSL for a specified
RSC-M. The tuple defined is not important. A message requests a
confirmation to add, reject, or edit this tuple. After the confirmation, the
system defines the five tuples that remain for the RSC-M. A message
indicates the added tuples. Do not use the change command when you enter
data in tables with CAS interfaces.
Datafill for RSC-M for table GPPTRNSL appear in the following table.
Fields that apply directly to RSC-M appear. For complete details on how to
enter data in table GPPTRNSL, refer to the data schema section of the
Translations Guide.
Datafilling table GPPTRNSL
Subfield or
Field
refinement
AMCNO
SITE
Note: Subfield GROUP of field AMCNO in table GPPTRNSL, represents the P-side link group of
each RSC-M.
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-47
Entry Description
refer to AMC node location. Line module identification
subfields for AMCs, composed of subfields SITE,
FRAME, GROUP.
a maximum Location. Consists of an alphanumeric site
of 4 description of the AMC.
alphanumeric
characters
The entry in this subfield must be a valid entry
in the NAME field in table SITE. The HOST is
not a valid entry in this field.
—continued—
(continued)