Nortel DMS-100 Series Reference Manual page 371

Datafilling table ESAPXLA
Subfield or
Field
refinement
RESULT LSG
(continued)
CIRCUIT
AMBIG
RNGCD
Datafill example for table ESAPXLA
Sample datafill for table ESAPXLA appears in the following example.
MAP display example for table ESAXPLA
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling ESA lines and trunks on RSC-S UK / Europe 4-121
(continued)
Entry
0 to 19
0 to 31
Y or N
0 to 7
–––––––––––––––––––––––––––––––––––––––––––––––––––
ESAPOTS RCO2
IBN1 RCO2
IBN1 RCO2
ESATEST RCO2
–––––––––––––––––––––––––––––––––––––––––––––––––––
L MELB
T SRPXLA
T SRPDXLA
L MELB
ESA lines and trunks
Explanation and action
Line subgroup. Enter the number of the line
subgroup of the unit for the assigned line card.
The unit must be an LCM, RLCM, DLM or
RDLM unit.
Circuit. Enter the line card circuit number of the
line subgroup of the assigned line card.
Ambiguous. If the prefix digits are completely
different, enter N. If the user can dial the prefix
digits as the first digits of another number, enter
Y. Entry value: Y or N.
Ringing code. Enter the code for the type of
ringing associated with the line specified in the
LEN field. This ringing code is for lines on an
LCM or DLM.
—end—
PXLAKEY
REM3 0
REM3 0
REM3 0
REM3 0
RESULT
00 0 00 02
02 0 01 20
(continued)
411
6
9
611
Y 1
N 1